This group has not been assigned a structural definition yet.

This compound group has been populated using subgroups listed by MAK Commission of Germany.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group has not yet been assigned a structural definition.

This group has not been assigned a structural definition yet.

This group has not been assigned a structural definition yet.

The term “antimicrobials” is a general term to describe a variety of substances that kill or control the growth of microbes, including bacteria and fungi.

These substances are regulated as pesticides by the US Environmental Protection Agency and can present hazards to human and/or environmental health.

A great number of products on the market incorporate antimicrobials into their composition because they require preservation.  Water-based formulations and certain polymers are vulnerable to microbes that would otherwise feed on these materials and over time compromise their performance or appearance.

Some products on the market may include antimicrobials not for preservation, but to kill microbes that might make us sick.  However, to date there is no evidence that adding antimicrobials these products result in healthier populations, and the Centers for Disease Control & Prevention (CDC) and Food and Drug Administration (FDA) have both issued statements advising that adding antimicrobials to such products are unnecessary.

The inclusion of antimicrobials in finished products – especially when used as preservatives – is not always disclosed and it may be difficult to determine what additives are present, and in what amounts.

This is a partial list of antimicrobial additives that may be present in building products as identified by Healthy Building Network in 2016.  

Sources include the FDA: https://www.federalregister.gov/articles/2016/09/06/2016-21337/safety-and-effectiveness-of-consumer-antiseptics-topical-antimicrobial-drug-products-for

This compound group is based in part on the GADSL list of restricted antimicrobials at https://www.gadsl.org/ as "Biocidal coatings / biocidal additives, selected".

This group is populated from the list at https://biomonitoring.ca.gov/chemicals

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group is defined by the SMILES string 'C1=CC=C(C=C1)N'. For more information on SMILES, see https://en.wikipedia.org/wiki/Simplified_molecular-input_line-entry_system.

This compound group is defined by the SMILES string 'C1=CC=C(C=C1)N=NC2=CC=CC=C2'. For more information on SMILES, see https://en.wikipedia.org/wiki/Simplified_molecular-input_line-entry_system.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group was populated from Table 1 of "Arsenic, inorganic and soluble salts Evaluation of health hazards and proposal of a health-based quality criterion for drinking water" Environmental Project No. 1532, 2014. Danish Ministry of the Environment at https://www2.mst.dk/Udgiv/publications/2014/01/978-87-93026-86-5.pdf

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This group has not been assigned a structural definition yet.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group has not yet been assigned a structural definition.

This compound group has not yet been assigned a structural definition.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group was populated from the 2016 GADSL list at http://www.gadsl.org/

This compound group has not yet been assigned a structural definition.

This compound group was populated in part from chemicals in the NTP Research Report on Biological Activity of Bisphenol A (BPA) Structural Analogues and Functional Alternatives: Research Report 4, National Toxicology Program, October 2017.

https://ntp.niehs.nih.gov/ntp/results/pubs/rr/reports/rr04_508.pdf

The following chemicals were incorporated from HBN research:

• 127-54-8 Bisphenol G
• 13595-25-0 Bisphenol M
• 129188-99-4 Bisphenol TMC
• 599-64-4 2-PHENYL-2-(4-HYDROXYPHENYL)PROPANE

This groups is populated from chemicals in the MAK list.

This compound group has not yet been assigned a structural definition.

This group is populated from the list at https://biomonitoring.ca.gov/chemicals

This compound group has not yet been assigned a structural definition.

This compound group is defined by the SMILES string 'C1=C(C=C(C(=C1Br)O)Br)C#N'. For more information on SMILES, see https://en.wikipedia.org/wiki/Simplified_molecular-input_line-entry_system.

Populated from Swedish EPA

http://webapps.kemi.se/flodesanalyser/

This compound group is populated from Table 1-1 of NTP Report on Carcinogens 1997 Background Document for Cadmium at https://ntp.niehs.nih.gov/ntp/newhomeroc/other_background/cadmium_508.pdf.

This compound group is populated by taking the more general compound group and subtracting the chemicals listed.

This compound group has not yet been assigned a structural definition.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

DBP and DEHP were added to the OSPAR List of Chemicals for Priority Action in 1998 as part of the group “certain phthalates”. https://www.ospar.org/documents?v=7028

This compound group has not yet been assigned a structural definition.

This compound group has not yet been assigned a structural definition.

This compound group is chlorinated alkanes that have the molecular formula CnHxCl(2n+2–x) in which 10 ≤ n ≤ 20 (definition used by Environment Canada).

This compound group has not yet been assigned a structural definition.

This compound group has not yet been assigned a structural definition.

This group is populated by taking the POLYCHLORINATED BIPHENYLS (PCBs) group and removing members with 2 chlorine atoms.

This compound group has not yet been assigned a structural definition.

A structural search would require eliminating compounds containing carbon-hydrogen bonds, which is challenging.

This compound group has not yet been assigned a structural definition.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group has not yet been assigned a structural definition.

This compound group has not yet been assigned a structural definition.

This compound group is populated by taking the more general compound group and subtracting the chemicals found in the relevent Annex.

This compound group is defined by the SMILES string '[Cr]'. For more information on SMILES, see https://en.wikipedia.org/wiki/Simplified_molecular-input_line-entry_system.

This group has not been assigned a structural definition yet.

This compound group has not yet been assigned a structural definition.

This compound group has not yet been assigned a structural definition.

List extracted from Annex 1 of 

Dossier prepared in support for a nomination of PFOS to the UN-ECE LRTAP Protocol and the Stockholm Convention

The dossier is prepared by the Swedish Chemicals Inspectorate (KemI) and the Swedish EPA, Sweden August 2004

This group has not been assigned a structural definition yet.

This compound group is populated with copper metal, and a limited number of copper salts and alloys.

This compound group has not yet been assigned a structural definition.

The various forms of crystalline silica are: α-quartz, β-quartz, α-tridymite, β-tridymite, α-cristobalite, β-cristobalite, keatite, coesite, stishovite, and moganite. NIOSH (2002)....Keatite, coesite, stishovite, and moganite are rarely found in nature. The most commonly occurring polymorphs are quartz, cristobalite and tridymite, which are found in rocks and soil. 

NIOSH Hazard Review: Health Effects of Occupational Exposure to Respirable Crystalline Silica (DHHS (NIOSH) Publication No. 2002–129). Cincinnati, OH, 145 pp.

From https://www.ncbi.nlm.nih.gov/books/NBK304370/#

This group hasn't been assigned a structural definition yet.

This group hasn't been assigned a structural definition yet.

This group hasn't been assigned a structural definition yet.

This compound group is defined by the SMILES string 'C1CCC2C(C1)C(=O)OC2=O'. For more information on SMILES, see https://en.wikipedia.org/wiki/Simplified_molecular-input_line-entry_system.

This compound group is defined by the SMILES string 'C=[N+]=[N-]'. For more information on SMILES, see https://en.wikipedia.org/wiki/Simplified_molecular-input_line-entry_system.

This group has not been assigned a structural definition yet.